A novel, highly potent nadph-dependent cytochrome P450 reductase from waste liza klunzingeri liver

The use of marine enzymes as catalysts for biotechnological applications is a topical subject. Marine enzymes usually display better operational properties than their animal, plant or bacterial counterparts, enlarging the range of possible biotechnological applications. Due to the fact that cytochrome P450 enzymes can degrade many different toxic environmental compounds, these enzymes have emerged as valuable tools in bioremediation processes. The present work describes the isolation, purification and biochemical characterization of a liver NADPH-dependent cytochrome P450 reductase (CPR) from the marine fish Liza klunzingeri (LkCPR). Experimental results revealed that LkCPR is a monomer of approximately 75 kDa that is active in a wide range of pH values (6–9) and temperatures (40–60 °C), showing the highest catalytic activity at pH 8 and 50 °C. The activation energy of the enzyme reaction was 16.3 kcal mol−1 K−1. The KM values for cytochrome C and NADPH were 8.83 μM and 7.26 μM, and the kcat values were 206.79 s−1 and 202.93 s−1, respectively. LkCPR displayed a specific activity versus cytochrome C of 402.07 µmol min−1 mg1, the highest activity value described for a CPR up to date (3.2–4.7 times higher than the most active reported CPRs) and showed the highest thermostability described for a CPR. Taking into account all these remarkable catalytic features, LkCPR offers great potential to be used as a suitable biocatalyst

The combination of covalent and ionic exchange immobilizations enables the coimmobilization on vinyl sulfone activated supports and the reuse of the most stable immobilized enzyme

The coimmobilization of lipases from Rhizomucor miehei (RML) and Candida antarctica (CALB) has been intended using agarose beads activated with divinyl sulfone. CALB could be immobilized on this support, while RML was not. However, RML was ionically exchanged on this support blocked with ethylendiamine. Therefore, both enzymes could be coimmobilized on the same particle, CALB covalently using the vinyl sulfone groups, and RML via anionic exchange on the aminated blocked support. However, immobilized RML was far less stable than immobilized CALB. To avoid the discarding of CALB (that maintained 90% of the initial activity after RML inactivation), a strategy was developed. Inactivated RML was desorbed from the support using ammonium sulfate and 1% Triton X-100 at pH 7.0. That way, 5 cycles of RML thermal inactivation, discharge of the inactivated enzyme and re-immobilization of a fresh sample of RML could be performed. In the last cycle, immobilized CALB activity was still over 90% of the initial one. Thus, the strategy permits that enzymes can be coimmobilized on vinyl sulfone supports even if one of them cannot be immobilized on it, and also permits the reuse of the most stable enzyme (if it is irreversibly attached to the support)

Tuning lipase B from Candida antarctica C–C bond promiscuous activity by immobilization on poly-styrene-divinylbenzene beads

Lipase B from Candida antarctica (CALB) is able to catalyze C–C bond formation. After immobilization onto a hydrophobic PS-DVB support, the activity increases when compared to that of the soluble or tan – the commercially available Novozyme 435 (being up to 6 fold more active). Our results show that although this activity is not related to the catalytic group, the promiscuous activity of CALB may be tuned via immobilization. In addition, we have show that the secondary structure of both immobilized enzymes is quite different, using FT-ATR-IR spectroscopy

Enzyme production of D-gluconic acid and glucose oxidase : successful tales of cascade reactions

This review mainly focuses on the use of glucose oxidase in the production of D-gluconic acid, which is a reactant of undoubtable interest in different industrial areas. The enzyme has been used in numerous instances as a model reaction to study the problems of oxygen supply in bioreactors. One of the main topics in this review is the problem of the generated side product, hydrogen peroxide, as it is an enzymeinactivating reagent. Different ways to remove hydrogen peroxide have been used, such as metal catalysts and use of whole cells; however, the preferred method is the coupling glucose oxidase with catalase. The different possibilities of combining these enzymes have been discussed (use of free enzymes, independently immobilized enzymes or co-immobilized enzymes). Curiously, some studies propose the addition of hydrogen peroxide to this co-immobilized enzyme system to produce oxygen in situ. Other cascade reactions directed toward the production of gluconic acid from polymeric substrates will be presented; these will mainly involve the transformation of polysaccharides (amylases, cellulases, etc.) but will not be limited to those (e.g., gluconolactonase). In fact, glucose oxidase is perhaps one of most successful enzymes, and it is involved in a wide range of cascade reactions. Finally, other applications of the enzyme have been reviewed, always based on the production of D-gluconic acid, which produces a decrease in the pH, a decrease in the oxygen availability or the production of hydrogen peroxide; in many instances, cascade reactions are also utilized. Thus, this review presents many different cascade reactions and discusses the advantages/drawbacks of the use of co-immobilized enzymes

Production, immobilization and synthesis of pharmacological derivatives of lipase B from Candida antarctica in Pichia pastoris

Lipase B from Candida antarctica (CALB) is widely used because of its excellent enantioselectivity. Producing this recombinant lipase in Pichia pastoris has advantages since it can be cultured in simple media and can reach high cell densities. This capability is especially important when using a constitutive promoter for lipase production, as here. The PPGK promoter is similar to the well-known PGAP promoter and also circumvents the need for inducing production with methanol, which is a hazard when used on a large scale and would increase the downstream production costs, which could be prohibitive for pharmaceutical products. This study tested two main fermentation strategies: continuous and fed-batch. In both cultures, different specific growth rates occurred (0.05, 0.10, 0.15 and 0.18h–1), and process parameters (qP, qS, YX/S, YP/X, YP/S) were evaluated in order to properly compare them. The highest specific production rate achieved with a continuous culture was 57.71 U/gX.h with µ=0.15 h–1 and 16 U/gX.h with µ=0.14 h–1 for a fed-batch culture. Productivity decreased dramatically near the µmax (0.18 h–1) for P. pastoris (57.6% lower). The best strategy for production was calculated over a three-month period. In both cases, the enzyme is secreted to the supernatant and purification is needed to ensure that only LIPB participates in further reactions. The immobilization process is ideal because purification and concentration is achieved in only one step, reusability is made possible, and in certain cases, stability and efficiency are boosted. Hydrophobic core-shell polymeric supports synthesized by a combined suspension and emulsion polymerization process have shown good potential for lipase immobilization procedures and were used in this study, compared to traditional supports such as Accurel, in order to determine their efficiency. After the enzyme was immobilized, the reactions included the resolution of (±)-1,3,5-O-benzyl-myo-inositol (DL-1) via acylation using vinyl acetate in hexane, and resolution of (±)-1,2-O- isopropylidene-3,6-di-O-benzyl-myo-inositol (DL-2) via acylation using vinyl acetate (solvent-free system). The support used directly affected the reaction, but trends were observed. In general, the recombinant lipase produced (LIPB) had higher resolutions than the commercial lipase (CALB, Novozym 435). In the resolution of DL-1 and DL-2 via transesterification (using different media), LIPB immobilized in Accurel or PS-co-DVB/PS-co-DVB showed more activity per enzyme molecule than CALB immobilized in similar supports, while when immobilized in PMMA-co-DVB/ PMMA-co-DVB the activities of the two enzymes were similar. The recombinant LIPB immobilized on PS-co-DVB proved to be the most efficient in the enantioselective resolution of both racemic derivatives, DL-1 and DL-2. The productivity for DL-2 resolution was 50% higher than the commercial Novozym 435, and the new derivative was operationally more stable than Novozym 435. The products obtained had a high level of purity (ee of 99% for both derivatives). Both products of the enantio-selective reaction, L-2 and L-5, obtained from the racemic derivatives (DL-1 and DL-2, respectively), are intermediates from different pharmacological pathways involved in the synthesis of building blocks for drugs that inhibit the etiological agent of Chagas disease, Trypanosoma cruzi

Novozym 435 : the “perfect” lipase immobilized biocatalyst?

Novozym 435 (N435) is a commercially available immobilized lipase produced by Novozymes. It is based on immobilization via interfacial activation of lipase B from Candida antarctica on a resin, Lewatit VP OC 1600. This resin is a macroporous support formed by polyIJmethyl methacrylate) crosslinked with divinylbenzene. N435 is perhaps the most widely used commercial biocatalyst in both academy and industry. Here, we review some of the success stories of N435 (in chemistry, energy and lipid manipulation), but we focus on some of the problems that the use of this biocatalyst may generate. Some of these problems are just based on the mechanism of immobilization (interfacial activation) that may facilitate enzyme desorption under certain conditions. Other problems are specific to the support: mechanical fragility, moderate hydrophilicity that permits the accumulation of hydrophilic compounds (e.g., water or glycerin) and the most critical one, support dissolution in some organic media. Finally, some solutions (N435 coating with silicone, enzyme physical or chemical crosslinking, and use of alternative supports) are proposed. However, the N435 history, even with these problems, may continue in the coming future due to its very good properties if some simpler alternative biocatalysts are not developed

Aqueous extraction of seed oil from mamey sapote (Pouteria sapota) after Viscozyme L treatment

In this study, aqueous enzymatic extraction (AEE) was evaluated during the process of obtaining oil from mamey sapote seed (OMSS). Viscozyme L enzyme complex was used at pH 4 and 50 ◦C during the optimization of the extraction process by central composite design and response surface methodology. Optimal conditions were: 3.5% (w/w) of enzyme (regarding the seed weight), 5.5 h of incubation time, 235 rpm of agitation rate, and 1:3.5 of solid-to-liquid ratio. These conditions enabled us to obtain an OMSS yield of 66%. No statistically significant differences were found in the fatty acid profile and physicochemical properties, such as the acid and iodine values and the percentage of free fatty acids, between the oil obtained by AEE or by the conventional solvent extraction (SE). However, the oxidative stability of the oil obtained by AEE (11 h) was higher than that obtained by SE (9.33 h), therefore, AEE, in addition to being an environmentally friendly method, produces a superior quality oil in terms of oxidative stability. Finally, the high oil content in mamey sapote seed, and the high percentage of oleic acid (around 50% of the total fatty acid) found in this oil, make it a useful edible vegetable oil

Bioprocess development for biolubricant production using microbial oil derived via fermentation from confectionery industry waste

Microbial oil produced from confectionery and wheat milling side streams has been evaluated as novel feedstock for biolubricant production. Nutrient-rich fermentation media were produced by a two-step bioprocess involving crude enzyme production by solid state fermentation followed by enzymatic hydrolysis of confectionery industry waste. Among 5 yeast strains and 2 fungal strains cultivated on the crude hydrolysate, Rhodosporidium toruloides and Cryptococcus curvatus were selected for further evaluation for biolubricant production based on fermentation efficiency and fatty acid composition. The extracted microbial oils were enzymatically hydrolysed and the free fatty acids were esterified by Lipomod 34-MDP in a solvent-free system with trimethylolpropane (TMP) and neopentyl glycol (NPG). The highest conversion yields were 88% and 82.7% for NPG esters of R. toruloides and C. curvatus, respectively. This study also demonstrates that NPG esters produced from microbial oil have promising physicochemical properties for bio-based lubricant formulations that could substitute for conventional lubricants

New insights into the genetic etiology of Alzheimer's disease and related dementias

Characterization of the genetic landscape of Alzheimer's disease (AD) and related dementias (ADD) provides a unique opportunity for a better understanding of the associated pathophysiological processes. We performed a two-stage genome-wide association study totaling 111,326 clinically diagnosed/'proxy' AD cases and 677,663 controls. We found 75 risk loci, of which 42 were new at the time of analysis. Pathway enrichment analyses confirmed the involvement of amyloid/tau pathways and highlighted microglia implication. Gene prioritization in the new loci identified 31 genes that were suggestive of new genetically associated processes, including the tumor necrosis factor alpha pathway through the linear ubiquitin chain assembly complex. We also built a new genetic risk score associated with the risk of future AD/dementia or progression from mild cognitive impairment to AD/dementia. The improvement in prediction led to a 1.6- to 1.9-fold increase in AD risk from the lowest to the highest decile, in addition to effects of age and the APOE ε4 allele

Prevalence, associated factors and outcomes of pressure injuries in adult intensive care unit patients: the DecubICUs study

Funder: European Society of Intensive Care Medicine; doi: http://dx.doi.org/10.13039/501100013347Funder: Flemish Society for Critical Care NursesAbstract: Purpose: Intensive care unit (ICU) patients are particularly susceptible to developing pressure injuries. Epidemiologic data is however unavailable. We aimed to provide an international picture of the extent of pressure injuries and factors associated with ICU-acquired pressure injuries in adult ICU patients. Methods: International 1-day point-prevalence study; follow-up for outcome assessment until hospital discharge (maximum 12 weeks). Factors associated with ICU-acquired pressure injury and hospital mortality were assessed by generalised linear mixed-effects regression analysis. Results: Data from 13,254 patients in 1117 ICUs (90 countries) revealed 6747 pressure injuries; 3997 (59.2%) were ICU-acquired. Overall prevalence was 26.6% (95% confidence interval [CI] 25.9–27.3). ICU-acquired prevalence was 16.2% (95% CI 15.6–16.8). Sacrum (37%) and heels (19.5%) were most affected. Factors independently associated with ICU-acquired pressure injuries were older age, male sex, being underweight, emergency surgery, higher Simplified Acute Physiology Score II, Braden score 3 days, comorbidities (chronic obstructive pulmonary disease, immunodeficiency), organ support (renal replacement, mechanical ventilation on ICU admission), and being in a low or lower-middle income-economy. Gradually increasing associations with mortality were identified for increasing severity of pressure injury: stage I (odds ratio [OR] 1.5; 95% CI 1.2–1.8), stage II (OR 1.6; 95% CI 1.4–1.9), and stage III or worse (OR 2.8; 95% CI 2.3–3.3). Conclusion: Pressure injuries are common in adult ICU patients. ICU-acquired pressure injuries are associated with mainly intrinsic factors and mortality. Optimal care standards, increased awareness, appropriate resource allocation, and further research into optimal prevention are pivotal to tackle this important patient safety threat